angle of delay

英 [ˈæŋɡl ɒv dɪˈleɪ] 美 [ˈæŋɡl əv dɪˈleɪ]

网络  滞后角

机械



双语例句

  1. The results show that the steered angle of acoustic arrays increases with the delay time increasing between the neighbour elements.
    结果表明,随着阵元间延迟时间的增加,声束偏转角逐渐增加。
  2. Through analyzing relation between δ and θ,δ and n, it is shown that the material selecting scope can be extended and that the bigger angle of total reflection can improve chromatism of the delay device.
    通过对δ与θ和δ与n的关系分析,显示了扩大材料选择范围的可行性。结果表明,较大的全内反射角的选择有利于改善延迟器件的消色差性。
  3. This Paper Presented a simple method for measuring wedge angle between end-faces of crystal bar used in microwave delay lipe.
    本文介绍了一种简便的测量微波延迟线所用晶棒两端面间楔角大小的方法。
  4. Analysis and research about the organization of competitive sports are conducted from a new angle of management and the usual problems of low efficiency, overspending, confusion and delay are somewhat solved, which is a starting point towards the management innovation of competitive sports.
    从管理角度对赛事组织活动进行了新的分析研究,初步解决了在组织体育赛事管理中常常存在的低效、超支、混乱及延期等问题,对体育赛事管理创新进行了初步尝试。
  5. The result of data processing, including cycle slip detecting, gross error, azimuth and elevating angle of satellites, the signal to noise ratio, the effect caused by multi-path and ionosphere delay, are saved to different files in a certain form for the next analysis.
    对数据处理的结果,包括周跳探测、粗差剔除、高度角和方位角、信噪比、电离层延迟影响和多路径效应影响等,按照一定的格式生成统计文件,以便后续处理分析。
  6. With the increase of the vectored angle, the effect of the jet on the flow control becomes stronger, i.e. the jet makes the leading edge vortex breakdown delay in the direction of the vectored jet, and make another leading edge vortex breakdown early.
    随着喷流偏转角的增大,喷流对流动控制的作用越来越大,喷流使喷流偏转方向一侧前缘涡破裂位置的延迟量增大,而另一侧前缘涡有提前破裂的趋势。
  7. Using the simulation method and a lorentzian oscillator model, the influence of the deviation in experimental parameters, including the thickness of samples, the incident angle, the misalignment of the time delay line, the background noise and the laser noise is analyzed.
    首次利用模拟THz辐射脉冲入射到共振吸收的样品上的方法分析了厚度、角度、平移台错位、背景噪声及激光器噪声等对于光学常数测量产生的影响。
  8. The angle fuel wind-Reheat steam temperature process of power unit is a typical large inertia and large delay thermal object. The PID controller is difficult to meet the performance requirements of the object.
    单元机组燃料风倾角-再热汽温被控对象是一个典型的热工大惯性大迟延对象,常规的PID控制器很难满足性能要求。
  9. According to the proposed algorithm to calculate the three-phase compensating admittance, use the method of rational interpolation to calculate the angle of the trigger delay, and triggered TCR conduction to compensate system.
    根据所设计的算法,计算出系统的三相补偿导纳,利用有理插值法计算触发延迟角,触发三相TCR导通,对系统进行补偿。
  10. Through simulation, the estimation angle of arrival, departure angle and delay are achieved.
    接着对SAGE算法做了归纳,在多径情况下,通过仿真实现离开角度、到达角和延时的估计。
  11. In the trigger aspect, we study of the relationship between the compensation admittance and the thyristor trigger angle, calculation the formula of compensation trigger angle, and studied the trigger delay system.
    在触发方面,研究了补偿导纳与晶闸管触发角之间的关系,推导出由补偿导纳计算触发角的计算公式,并对触发系统中的延时进行了研究。
  12. This algorithm uses the angle output of the PLL to construct a two-octave component in order to offset middle part of the two frequency components and achieve the purpose of eliminating the delay of the low-pass filter.
    该算法采用PLL的角度输出来构造一个两倍频的分量,用来抵消中间环节的两倍频分量,来达到消除低通滤波器延时的目的。
  13. Multi-longitudinal-mode sum-frequency parameter sfm was introduced in analysis of noise. The relation between laser noise, the angle of laser crystal fast axes and phase delay through sfm.
    在分析噪声特性的过程中引入了多纵模间的和频系数Sfm,模拟得到激光器噪声与激光器晶体快轴间夹角、相位延迟之间的关系。
  14. According to the specific needs of applications, the right value of energy and the offset angle weight are set by adjusting the degree of aggregation among the multi-paths, and the Number of multi-path and the delay on the path are adaptive.
    本算法根据具体应用需求,设置能量权值与偏移角权值。通过调节权值可以改变多路径间聚集程度,从而调节多路径条数和路径上的时延。